Category Archives: Project 2

Supplementary samples – Assignment 2

4 January 2017

The additional work presented here was made in recognition of the Assessment feedback from Textiles 1: Exploring ideas. I have made two more samples, one from project 1 (joining) and one from project 2 (wrapping). In both samples, I have paid specific attention to choosing materials with contrasting textures, including found objects.


Supplementary sample 1: Joining contrasting materials with staples

This sample was made partly as a response to my assessment feedback, but also after being inspired by a fellow student’s Facebook entry (Weidema, 2017). In her samples, Inger Weidema has been really successful at creating dramatic results by combining dissimilarly textured materials. It made me think back to the “sorting” stage of Assignment 2, and how much more engaging my samples would have been had they joined contrasting materials. In particular:

  • Joining with staples (project 1, exercise 1, sample 1)
  • Joining with dressmakers’ pins (project 1, exercise 1, sample 5)
  • Joining with safety pins (project 1, exercise 2, sample 1)

I set about considering unusual or interestingly textured materials which I might use; natural bark or twigs, bamboo root control polyurethane (shiny black), felt, embossed aluminium, heat-treated/distorted polyester or plastics, heat-distressed Tyvek or Luxtradur.

After trying out variations by placing materials next to each other, I decided to opt for high contrast (heavily textured vs smooth/reflective). I started by needle-felting some hand-dyed fleece onto some commercial acrylic felt. The aim was to produce a rough textured fabric with interesting colour variation. I wanted to contrast this with a reflective material such as aluminium or polyurethane.

I was keen to use one of the “hard joining” methods which I had identified in the “sorting” phase of the project. Because I was also interested in using birch bark (see below), I chose staples, so that I could mirror the natural horizontal markings on the bark with the joining method.

 

The birch bark was particularly appealing because of it’s fragility and the contrast of this with the other materials which I was using, including the staples.

To bring continuity into the sample, I used two types of aluminium; some foil cups and a scourer, which I had pulled apart to form a textured, open mesh. I chose green shades for my needle-felting because they reminded me of algae on the birch bark, which brought a sense of relationship to the elements in the sample. 

I had intended to use the flat surface of the needle-felting (either the back or front, depending which I preferred), however when I started joining he pieces, I found that it was the layered edges which appealed to me most (see below), so I ‘pleated’ the felt to show these off to best advantage. 

I found that the aluminium foil cups were very versatile; I was able to overlap them, and once they were joined (stapled) together, I moulded/crushed them to make interesting surface shapes.

You can see from the photo above (detail) that the staples partially tore the birch bark. I actually like this effect, because it emphasises the joins as well as the fragility of the bark.

The photo below shows the whole sample:

I like the feeling of continuity and rhythm generated by the repeating elements, the contrast in textures and in open and solid materials. In this sample, the joins are decorative/visible (although only against the bark). I feel that the sample could be enhanced further by also using a second joining method, such as individual knotted stitches (see thumbnail below) to emphasise the ridges and troughs. These threads could also help unite the colour scheme, which as it stands is somewhat incohesive.

 On_the_table.jpg

  

Supplementary sample 2: Uneven wrapping using various threads and found objects

Again prompted by a response to my assessment feedback, but also inspired by Judith Scott’s work (Morris and Higgs, 2014). I noticed that there were a couple of techniques which Scott used particularly successfully in her pieces. Firstly, she used a variety of found objects (not just threads) to enhance the textural quality of her pieces. These included: flexible hose, tights, pieces of scrap paper, beads, rag fabric strips, foam sheet, and larger recycled objects including a bicycle wheel and wicker basket. Secondly, she  very effectively used “patches” of different coloured threads (often woven or interlaced), to create accents within her sculptures.

Although I was very pleased with project 2, exercise 3, sample 5 (see thumbnail below), I now had a strong urge to experiment with found objects!

Photo_1_pan.jpg

I decided to rework the doll I had used for project 2, exercise 3, sample 3 (see below)

Cindy.jpg

I hadn’t liked the outcome of this sample, and I wanted to challenge myself to see if I could overcome the association of wrapping a doll with clothing. The doll provides an interesting, irregular starting shape and I wanted to see if I could wrap it as an object, rather than seeing it as anthropomorphological.

I started by choosing found objects and threads and laying them out in different combinations until I had a selection which excited me. In hindsight, I should have been documenting this research in my sketchbook! (as I should have also done for supplementary sample 1)

Bottom left is some hand-spun 2-colour plied yarn, which I decided to use as my base thread. There are scraps of dressmakers’ bias and satin binding tape, and short pieces of elastic (each just a few cm long) from my mother’s needlework box. I also have strips of orange fruit netting, recycled sari silk a plastic spoon, plastic rings which hold beer multi-packs and a selection of turquoise threads, including a piece of fishing netting which I gathered from a trip to the beach.

I started wrapping the handspun yarn, sari silk, fruit netting and knotted lengths of elastic. I then incorporated the plastic fork, beer multi-can plastic and tube of shirring elastic (see below)

I then needed to add depth and contrasting colour accents. I used the piece of reclaimed fishing net, but found that the other turquoise threads which I had selected were too ‘blue’, so I found a selection of threads at the ‘greener’ end of the spectrum with different thicknesses and lustre properties.

I also used an odd turquoise button from my mother’s needlework box. Unfortunately there was only one, as I would have liked to use more buttons or beads. 

The photos below shows the finished sample, front and back

 

I am quite pleased with the effect, and the fact that I have managed to wrap the doll without feeling as if I was clothing it. I particularly like the emphasised areas of colour which I have worked with buttonhole and filling stitches using a needle (see below)

Although this sample is pleasing, I actually prefer the depth and balance which I achieved with project 2, exercise 3, sample 5. I ran out of time/materials with this sample. To make it work, it needs more depth (i.e. more wrapped and woven threads) and larger solid objects of colour (I am specifically thinking about turquoise green beads or buttons to consolidate the work).

 

References:

Morris, C. and Higgs, M. (Eds) (2014) Judith Scott: Bound and unbound. London. DelMonico books.

Weidema, I. (2017) Why not? At: https://www.Facebook.com/permalink.php?story_fbid=682750448558369&id=149544698545616 (Accessed 4 January 2017)

Part 2, Stages 2&3, Project 2, Exercise 3 – Uneven wrapping

30 November 2016


Project 2, Exercise 3 – Uneven wrapping

The brief for this exercise was to use a variety of ways to bind an object (or objects), responding to the shape of the object in a way which seems appropriate. In particular, it was suggested that reference be made to Judith Scott’s work; wrapping in an experimental and playful way.

In some ways, I had done this already by going beyond the brief in sample 7, of project 2, exercise 1 (see below):

Egg_box.jpg

I got so absorbed in the making process that I didn’t just wrap, but also looped, tied and wove!

In preparation for this exercise I had purchased some second hand dolls.

 I like the idea of wrapping an anthropomorphic shape, because it offers so many possibilities.

 

SAMPLE 1: Bandage-wrapped doll

One of the suggestions in the course notes was to control the profile or shape of an object by introducing padding, or wrapping multiple items together. The doll seemed like a perfect opportunity to use this technique to alter body shape. 

Before wrapping, I added a piece of polyester wadding to the tummy to suggest pregnancy. I then wrapped the doll from head to foot in crepe bandage. The whole body (except the eyes) were covered, and the was doll rendered immobile. The symbolism was to convey the sense of anonymity and constraint associated with becoming a mum. Perhaps a bit controversial, but I feel that the analogy portrays the concept well (see below).

In my analysis, the bandage represents the “uniform” of social conformity. In this instance I don’t see the bandage as a suggestion of healing, rather as a technique of ‘preservation’ of physical form (as in the wrapping of mummies).

 

SAMPLE 2: Doll ‘clothed’ in cellophane then wrapped in threads

After sample 1, I was intending to wrap subsequent dolls in visually pleasing (decorative) threads, and to use the body as simply a ‘hook’ for wrapping. However, I couldn’t escape the feeling that I was “clothing” the doll’s body. When I held cellophane around the doll, it resembled a dress – a sexy dress. The doll had become a proxy for the language of clothing. It made me think about what clothing means in relation to social acceptance and behaviour; about dress codes and the subtleties which make us view certain ways of dressing as risqué, eccentric or dowdy.

Having dressed the doll, I decided to wrap it in threads to represent the social constraints imposed. My aim was to challenge how society responds to clothing, and to suggest that assumptions can be deleterious to the individual.

 

I chose to wrap in pink merino yarn because it is a feminine colour. I also used the mohair because of the contradiction of it being soft and fluffy and yet being used as a restraint. The limbs were bound to restrict movement (analogous, for example, to a restriction on places where it might be socially acceptable to visit when dressed in a certain way). The wrapping extends over the whole body. Although I liked the symbolism of wrapping and covering the mouth, I found that the expression of femininity of the doll was then lost, so I decided against it.

For my message to get across, the wrapping had to be sparse, so that the doll and clothing were visible underneath. Because I feel strongly about this subject, it is difficult for me to know whether other people might interpret the sample in the same way (and if not, whether they might derive enjoyment by interpreting it differently). This makes it difficult to judge the “success” of this sample. Thinking purely from aesthetics, I don’t find the wrapping is particularly engaging. Perhaps this is an area which could be developed?

 

SAMPLE 3: Doll ‘clothed’ in a cardboard tube then wrapped in threads

This sample is supposed to show that by ‘dressing down’, the response of society can be equally as negative and constraining. I initially covered the doll in a cardboard kitchen towel tube, then wrapped burlap, black paper string and jute around it, to hold the tube in place, and constrain the doll’s body. I left the mouth uncovered, so that the femininity of the doll would be evident. The single pink piece of merino around the torso similarly makes reference to the feminine.

Visually, I don’t find this doll is as engaging as sample 2. It has a “Cinderella” feel, which is maybe too much of a cliché. I also think that the message is not as strongly conveyed.

 

SAMPLE 4: Doll wrapped to represent the two sides of depression/grief

For this sample, I drew again on the use of colour to depict mood (Tinsdale, 2016). I used blue cellophane over the head and face to represent internal sadness and loss. In contrast, the persona which is presented to the public is the wrapped body; the sparkly-dressed dancer full of zest for life.

The wrapping is pretty, but I wonder whether the symbolism is clear? The choice of fabric for the dress and leg coverings tends to suggest a sari, and the blue face shroud a religious head covering.

 

SAMPLE 5: Wrapped saucepan

For this sample I returned to the influence of Judith Scott. Although the course notes suggest wrapping small bric-a-brac (20cm max), I tend to prefer working in a larger scale, so chose a small frying pan which I hoped wouldn’t be too heavy and large to send to my tutor.

I started with one of my handspun ‘art yarns’ and chose conventionally hand spun yarns to complement it (see below):

The lime green colour in the hand spun yarn allowed me to incorporate one of my favourite colours – fluorescent yellow (a commercially spun yarn). I started by wrapping a base layer of purple yarn around the saucepan:

Next, I wrapped the art yarn:

At this stage the sample looks very uniform and lacks depth and excitement. I then started to add accent colours (although I went on to remove the mustard yellow tassels in the photo below because they didn’t fit with the feel of the piece).

At this stage I incorporated two sections of egg box, one each side of the pan, which helped break up the silhouette and gave hooks which I could use to wrap around and change direction.

At the next stage I added finer threads such as polyester dressmakers’ cotton, Coton a Broder, mohair, embroidery thread and ribbon. I made loops and tangles to impart depth and texture. I added accents of shocking pink jumbo pipe-cleaner, fluorescent yellow lace, yellow organza ribbon, heat-creased synthetic fabric and bobble fringe. These were woven and pushed into the piece. The final result is shown below:

This sample is my favourite of project 2. It is visually interesting with depth and a suggestion of movement. The colour balance works extremely well, especially with the complementary violet, lime green, purple and yellow. It has an organic feel; the pink pipe cleaners and fabric scraps seem to be emerging or erupting from the body of the sample. I love the complexity of the surface. Each time I look, I see new subtleties of colour and new areas of textural interest. It has confirmed my preference of working with larger samples.

Post script on the work of Judith Scott 9/12/16

Looking back at the work of Judith Scott, I can see that her style differs quite markedly from mine. Her work involves mainly threads in tension, looped under each other to provide a ‘framework’, whereas my style used mostly wrapping, and features many loose threads and tangles. Scott’s work also makes use of many more found objects (for example, her wrapped chair incorporates a large wheel). Her wrapping materials are often reclaimed; washing machine hose, old tights, for example. This gives a huge amount of depth and texture to her pieces. I would like to experiment by incorporating found objects in my wrapping and using them for wrapping materials.

 

SAMPLE 6: Wrapped pine cone 

Because sample 5 was large, I wanted to see if I could scale down my wrapping and make an equally engaging small piece. I chose a pine cone which I initially wrapped in fine beige crochet cotton, working in a circle between the protrusions. The aim was to fill the gaps, but not to cover the cone completely.

I also selected lustrous machine embroidery threads and red and blue Angelina fibre, being suitably fine and worked these over the crochet cotton. The finished sample is shown below:

I tool photographs in both natural and artificial light but I couldn’t get a proper representation. This was the best picture that I managed to take. The graduation of colour from pink/red at the tip to blue/red at the base and underneath, and the lustre of the threads don’t show up to best effect. 

I was conscious that this sample should not look like a Christmas decoration, and I feel pleased that it doesn’t. It has a ‘messy’ look due to the halo of Angelina around the outside, which I like. It is also a point of interest that some threads are wrapped in around the pine cone, whilst others move vertically between the ledges. Although the outcome is interesting, I do not feel that it is as successful as sample 5 because it lacks depth and textural variation. Perhaps it is also less exciting because the colours are not strongly contrasting or complementary.

 

References:

Tinsdale, J. (2016) “Do they look evil enough?”. At: https://mobile.twitter.com/JackTindale/status/7943011177652101 (Accessed 1 December 2016)

Part 2, Stages 2&3, Project 2, Exercise 2 – Wrapping with materials and threads

28 November 2016


Project 2, exercise 2 – Wrapping with materials and threads

The exercise stipulated that I use the work of Christo and Jean-Claude as a starting point. I was particular inspired by Christo’s portrait of Jean Claude (Christo, 1963), a painted portrait wrapped in polythene and string. By using the tightness of the string to form creases in the polythene surface, Christo achieved a sense of distance and mystery between viewer and subject. A similar technique was used in Christo’s “Wrapped Magazine” (1963) (Koddenberg, 2009:82), in which a recognisable image of the face of Marilyn Munroe appears captured and restrained in semi-opaque red polythene and rope.

Thinking about alternative materials, I remembered how Lucozade bottles (Mitchell, n.d.) used to be wrapped in orange-yellow cellophane film. I bought a selection of different colours to use in sampling.

 

SAMPLE 1: Childs’ mug wrapped in red cellophane and tapestry warp thread

I liked the idea of wrapping the Rupert Bear mug because it had a scene from the cartoon pictured on the front. I hoped that by using cellophane, I might partially obscure the image, and in doing so, say something about the wrapping in relation to the object.

The photo above shows the mug with the coloured cellophane. I had blue, green, purple, orange clear or red to choose from. I didn’t have a fixed idea initially about which to use, but when I held them up against the mug I felt that blue, green and purple all had sinister overtones. Blue in particular, was very cold, and didn’t really fit with the “fun”, “playtime” theme of the image. I recalled the emotive use of a blue filter applied to the photograph accompanying the Telegraph’s “Judges Verses the People” headline of 3 November (Tinsdale, 2016). Having ruled out These colours and clear, that left orange and red. Orange had strong associations with Lucozade, so I decided on red. I used tapestry warp thread to tie the cellophane, chosen because of it’s contrast, smoothness, and resemblance to parcel string. The result is shown below:

I used a book on knots to help guide me with the parcel-tie technique (Budworth, 2005: 147). Rather than cutting the thread between each of the tie points, I used the method for binding a sewn buttonhole loop (Ysolda, n.d.) to take the thread along the next point that I wanted to work from.

I was slightly disappointed with the properties of the cellophane, because it turned out to be a very flat wrapping material which strongly conformed to the shape of the mug. However, I did manage to position the pleats so that the areas of double thickness left some of the image was visible, and I managed to achieve some tightness and pulling around the handle, suggesting tension. 

I don’t feel that the colour works particularly well – red makes me think of danger, perhaps a poison bottle. Brown would probably have worked better.

The bulk of cellophane which is tied at the top of the sample reminds me of gift-wrapping and is at odds with the “parcelling up” and restraint of the string tie. It also makes the sample appear unbalanced. There is too much discontinuity in this sample for my liking, and no strong narrative.

 

SAMPLE 2: Childs’ mug wrapped in waxed paper and cotton string

A chose to wrap a “Thomas the Tank Engine” mug for my next sample (see below)

It had a bold, strong image which I hoped would show through the wrapping. Ideally I wanted a brown wrapping and considered baking parchment, however when I held it against the mug I felt that it would obliterate the image, so I decided on waxed paper instead as it was more transparent. The waxed paper was easy to mould around the cup and I was able to tuck the loose edges underneath, thus hiding the excess material. 

I chose commercially manufactured red paper string, this time I used less of the sewn buttonhole loop method used in sample 1, which I felt was rather too bulky.  I prefer this approach which makes the tying seem more uniform across the object.

This view from the side shows that I succeeded in retaining the visibility of the image. I am pleased with the distribution of string and knots, which is attractive and engaging. The choice of red string brings interest to what would otherwise be a rather bland sample, and it picks up the red colour in the imagery printed on the cup.

The photo below is the view from above, looking inside the cup. Unfortunately, I had an accident when tying and pushed a hole through the paper with my thumb.

I like the off-centre positioning of the knots and how they divide the circle shape. The knots are also decorative in themselves and add texture to the piece. 

The only aspect of this sample which does not work for me is the stark white colour of the waxed paper. If it were off-white then I would find it more visually appealing.

I’m not sure how I feel emotionally about this piece. When selecting the childrens’ mugs for wrapping, I was imagining that the outcome might make me think of protecting precious childhood memories, but somehow it feels more sinister. It’s as if childhood is being hidden or denied; being seen as somehow undesirable.

 

SAMPLE 3: A book wrapped in cellophane and string

This sample was inspired by Christo’s wrapped portrait of Jean-Claude (Christo, 1963). I chose a book of Bob Dylan songs. The front of the book featured a title and a photograph portrait, the back cover a list of songs included in the book. I first found a thick, clear plastic carrier bag, which I covered in orange cellophane to make a double-layer wrapping. I hoped that this would make my wrapping more bulky to enable me to achieve ripples and tucks.

There were several different grades of string which I could have used, ranging from rough jute garden twine to thick piping cord which resembled rope:

 Strings.jpg

I considered the thickness of the thread in relation to the size of the sample and how it might crumple the cellophane and plastic. I chose thick cotton string (back row left).

I purposely left a bulk of material at the bottom of the book, so that when folded and tied it, I would get double layers and interesting creases without completely obscuring the photograph of Dylan’s face (see below):

I am pleased with the behaviour of the wrapping material, and the degree of obscurity of the image is exactly as I had hoped. On this occasion I don’t mind the reflection of light from the cellophane.

Compositionally, I felt that I ought to avoid placing string over the face, however this has resulted in divisions which are rather more regular than I would have liked. I much prefer the composition of string on back cover, because of the triangular elements (see below):

So how do I feel about this sample? 

I am glad that this sample does not resemble a wrapped gift; the utilitarian string puts pay to that. As Dylan’s songs are famous for chronicling social unrest and civil rights, I was hoping to make the generic suggestion of a suppressed political voice, just visible but struggling to make itself heard (or seen in my analogy). By using the coloured cellophane I am suggesting that in how messages are viewed (be they songs, newspaper articles, speeches) there is an element of what we choose to see and how close we care to look.

Whilst this is a successful sample, I feel that it is very much a “study after Christo”, and I’m not sure how I might take it forward and make it my own.

 

SAMPLE 4: Coffee tin wrapped in artists’ canvass and thick piping cord

This sample was inspired by the wrapped tin cans of Christo. “Wrapped can” (1958) (Koddenberg, 2009:34), is an example, but there are many similar pieces using the same techniques. Before starting this series, Christo had worked to develop textured surfaces by creasing fabric or paper and applying sand and lacquer to achieve a characteristic surface finish. I find Christo’s abstract surfaces fascinating in their own right, but by extending the idea to wrapped cans, he was able to relate the surface to the object he was wrapping. Where and how the creases fall, and the tightness of the rope give the viewer information about both the object underneath and the wrapping material. 

I particularly like the impression of “stiffness” of the material Christo wrapped his tin cans with, and I wanted to create a sample with similar characteristics. I started with an empty coffee tin, and some artists’ canvas, which I had partially painted with black acrylic paint (see below).

The canvass had been intended for another project, but I had decided not to use it. I liked the way it was divided into painted and unpainted areas and the qualities of the weave of the fabric. This was particularly visible at the edges of the painted areas where the paint was sparse and only covered the top threads, making a diffuse edge (see below):

I wanted to use a rope-like thread, so I chose thick piping cord. I used a similar approach to tying as for samples 1-3. The result is shown below:

Overall there are some very good attributes to this sample. The knotting is well defined and forms a visually appealing feature. I am pleased with the 3-D composition (i.e. the way the colours divide the piece and the way the rope divides the piece). There are thick folds which provide a visual description of the physical properties of the canvas. 

I can’t help but feel that the surface of the fabric would be enhanced by acrylic wax or varnish to “set” the creases (making them look more as if they had been carved from a solid rather than fashioned from a fabric). Christo used lacquer, which helped to shrink the fabric onto the object underneath and made the tying thread (rope) appear to be embedded within the fabric. In my sample the rope sits above the fabric and I like that effect. However, I feel that the fabric would benefit from a further surface treatment to add interest.

 

The Japanese aesthetic

This next series of samples were inspired by Japanese aesthetic, in particular as a result of studying the book “How to wrap five eggs” (Oka, 2008). This was an enlightening text. I hadn’t realised that traditional Japanese packaging was considered an art form and a profession. It was interesting to read of it being the result of generations of use and experimentation to solve storage and transport problems. At the same time it is a handicraft applied to items whether they be large or small, valuable or of no monetary worth; the notion being that everything can, and should be made beautiful. Natural materials are favoured because they reflect the Japanese respect for harmony with nature. The Japanese psychology views packaging as a form ritual purification, so there are strong cultural associations with the activity (Oka, 2008:7-11).

I am strongly attracted to the use of natural materials and the symmetry of Japanese packaging. I thought back to my research and the “Bundles” series by Diane Cooper (Cooper, n.d.) with the contemporary interpretation she has placed on the Japanese aesthetic. I was really keen to explore these aspects for myself and I hope I am not deviating too far from the brief by working my own examples.

 

SAMPLE 5: Origami box and thread packaging

I first made the origami box from kimono-print origami paper. A common theme in Japanese traditional packaging seemed to be to make the packaging fit tightly around the items, so that seem a perfect fit; almost at one with the container. Once such example is sweet boxes (Oka, 2008:103).

I found that two toilet rolls were exactly the right width to fit my container. To disguise them and to infer a feeling of preciousness, I painted them with gold. They are secured in position with a gold parcel thread.

In contrast to my other samples, I wanted this one to be decorative. I purposely suggested valuable contents and allowed them to be visible by securing it without a lid. Nonetheless, the box contents are securely packed and cannot fall out, even if it is placed on it’s side or upside down.

I purposely tied the string tightly so that the edges of the box were pulled in. This further suggests security, cosiness and preciousness. I also purposely left the knots uppermost because I feel that they add to the feel of decoration and decadence.

 

SAMPLE 6: Marbles wrapped in leaves

This sample is inspired by Japanese wrapped confections or “chimaki”, which are commonly wrapped in leaves and tied with cords of sedge or rush (Oko, 2008:33). For my interpretation, I decided to use red-purple raffia cord. Despite being late November, I was lucky enough to find some crocosmia leaves in the garden, which were suitable to use.

In my choice of objects to wrap I wanted to suggest the idea or “morsels” or “tasty treats”. I chose medium sized marbles because they were the right size.

I started by wrapping a single marble (see below)

I then went on to wrap two more and join them with a plait, and a loop for hanging/storage (again in keeping with Japanese traditional packaging)

I wanted to pick up on the idea of utility and practicality (assuming they were food items, one could be unpackaged at a time leaving the other two sealed and protected).

I am pleased that I managed to make neat parcels. There is also beauty in the colour contrasts between the raffia and leaves.

 

SAMPLE 7: Lid of an egg box sandwiched between wooden sheets and tied with crochet cotton

This sample builds on the Japanese packaging technique in which a food item (such as a rice cake) is simply placed between two leaves as packaging (Oko, 2008:28). The choice of an egg box lid was somewhat arbitrary (I was looking for a lightweight object with a “thickness”). I used balsa wood sheets, because of the wood grain and the reference to the Japanese use of natural materials. I only had very thin (0.8mm) sheet and balsa wood is extremely soft and easily marked. Ideally, a harder wood or thicker sheet would have been preferable, as it provides better protection.

I noticed that several examples of Japanese packaging use very fine delicate thread, so I chose fine crochet cotton in a natural beige. I tied the package in the compositionally pleasing division of thirds, then down the centre which divides the surfaces into six roughly equal sections and which suggests that there are 6 items contained between.

The sample is shown below:

 

I am pleased with the way that this sample reflects the Japanese aesthetic. It’s plainness makes it seem calming and suggests that contains a delicate object. The threads are tantalisingly fragile, yet they keep the three elements together. As well as being a very practical way of protecting the upper and lower surfaces of an object there are strong emotional associations with this sample.

 

SAMPLE 8: Tied sticks

I wanted to extend the idea of traditional Japanese packaging to a group of poles or sticks. I started by harvesting some attractive dogwood and bamboo stems from the garden. For my thread, I considered both commercially produced paper string and raffia string (see below).

I have a good range of colours, and many provided a strong contrast with the bright red and green dogwood and bamboo stems. However, the synthetic colours seemed too harsh, so I narrowed my choice down to black paper string and pale brown raffia.

I decided to make a pair of samples; the red dogwood paired with the raffia and the bamboo with the soft charcoal black paper string.

I had to learn some knotting skills for this sample, so I started by testing out the knots on a wooden dowel.

Working from right to left, I first secured the thread using a rolling hitch (Budworth, 2005:49). I then worked along the dowel in half-hitches (Budworth, 2005:75) before tying off with a simple overhand knot.

Having mastered the techniques, I then worked my samples (see below).

I am very pleased with the results of this wrapping. The samples are visually very appealing (especially when viewed together as a pair). I like the way the string travels along the stems and the way it is purposefully secured at intervals. Although there are gaps visible between the stems, the join is very stable and secure, because I was able to position the half-hitches just before leaf bud joints. This also made the knotting feel very much in harmony with the object being wrapped.

 

References:

Budworth, G. (2005) The complete book of knots. London. Bounty Books.

Christo (1963) Wrapped portrait of Jeanne-Claude. [Oil n canvas portrait by Christo Javacheff wrapped with polythene and rope by Christo and mounted on a black wood board] At: http://christojeanneclaude.net/projects/wrapped-objects-statues-and-women (Accessed 11 November 2016)

Cooper, D. (n.d.) Bundles Varie’ 2. [canvas, felt, silk, cord]. At: http://www.dianecooper.org/bundles/BundleBV2Pop.html (Accessed 10 November 2016)

Koddenberg, M. (2009) Christo and Jeanne-Claude. Early works 1958-64. Bonn. Kettler Verlag.

Mitchell, S. (n.d.) Vintage Lucozade bottle. [Pinterest pin, n.d.] Available at: http://pin.it/N240IVo (Accessed 28 November 2016)

Oka, H. (2008) How to wrap five more eggs: Traditional Japanese packaging. London. Weatherhill.

Tinsdale, J. (2016) “Do they look evil enough?”. At: https://mobile.twitter.com/JackTindale/status/7943011177652101 (Accessed 1 December 2016)

Ysolda (n.d.) Blog: Sewn buttonhole loop. At: http://blog.ysolda.com/support/tutorials/sewn-button-loops/ (Accessed 29 November 2016)

Part 2, Stages 2&3, Project 2, Exercise 1 – Straight wrapping with threads

18 November 2016


Project 2, Exercise 1 – Straight wrapping with threads

I chose to wrap a wooden spoon for this exercise. I have interpreted the purpose of this exercise as exploratory, allowing students to experiment with and understand the following:

  1. Different thread types
  2. Even vs. uneven wrapping
  3. Different tensions
  4. Combinations of materials
Thinking about outcomes it will be interesting to note and record whether the thread and wrapping method:
  1. Emphasise or hide the shape of the wrapped object
  2. Infer texture
  3. Relate to, or is suggestive of what is underneath.
 
SAMPLE 1: Even and uneven wrapping, cotton double knitting yarn
 
As suggested, I started at the handle of the spoon and worked upwards towards the bowl. The tip of the bowl was impossible to wrap in the way I had been proceeding up the handle, so I decided to cover it by working threads diagonally, incorporating a dense area of thread in the process. The finished sample is shown below:
 
 
The colour and texture of the thread is intentionally bland, almost utilitarian, like dishcloth cotton. I like the way that the thread choice mirrors the domestic associations of the spoon. 
 
Because I was able to wrap tightly, the object underneath is easy to guess. The crossed threads at the tip add interest and texture, but do not disguise the spoon in any way. The only suggestion is that there might be something small trapped or hidden underneath the layer of crossed threads.
 
I was sufficiently interested in the sample to make a pencil sketch (see below):
 
 
I used regular graphic in different hardnesses to depict the thread, and water-soluble graphic for the shadows. This was very much an exercise in understanding to to represent three-dimensionality through tone. The threads only appear to be above if their shadows are correctly represented. It took careful observation, patience and effort to make the drawing.
 
 
SAMPLE 2: Even and uneven wrapping, crepe bandage
 
I chose this material because of it’s texture and flexibility. The stretchiness of the fabric made it easy to completely cover the spoon (see below):
 
 
The width of the crepe (7cm) meant that there were unavoidable overlaps which resulted in a distortion of the contour of the spoon, partially disgusting it. At the tip of the spoon, the bandage is a single layer and barely covers the wood. At the handle and other areas, several layers mean it is completely covered. The fabric is soft and thick and Feels like it is inferring a layer of protection. The association of bandages with healing helps to consolidate this idea.
 
I decided to use a water-solvable gel pen to sketch the sample (see below):
 
 
The texture of the crepe was difficult to capture, and whilst I am happy with the representation of the fraying edges, the surface texture of the fabric itself is rather too bold. Perhaps I should have used my silver gel pen for this detail?
 
 
SAMPLE 3: Even and uneven wrapping, nylon fishing line
 
I was able to easily wrap the fishing line along the handle of the spoon, but the bowl proved impossible, even using the method I had successfully employed in sample 1. I conceded that I could only partially cover the spoon with this nylon thread. Creating more and less dense areas was easy, and the thread appeared darker where it was more densely wrapped.
 
The tangles in the fishing line make me think of entrapment, or snaring. There is no feeling of protection with this wrapping, instead it suggests restraint, and limitation of freedom.
 
Being semi-transparent, the threads were interesting to draw (see below)
 
It was a challenge to make a distinction between fishing line threads and their shadows. The semi-transparency of the threads meant that areas which were wrapped more densely appeared darker, and the thread itself was highly reflective. I had to use lots of different hardness of graphite pencil to achieve the tonal differences which I needed.
 
 
SAMPLE 4: Even and uneven wrapping, Boston creeper vine
 
This vine looses it’s leaves in winter and because the stems are alive and ready to bust into leaf next Spring, they remain supple. I thought this would make an interesting wrapping material because of the textural interest, including the presence of dead tendrils and leaf-bud junctions. 
 
 
One reason for choosing the vine was because I had been thinking about the work of outsider artist Angus MacPhee (b.1917, d. 1997). McPhee was born on the Scottish island of South Uist, where he grew up learning the Island traditions of weaving, plaiting and twisting. After the Second World War, he returned to South Uist but seemed unable to cope with looking after himself and became uncommunicative. A diagnosis of schizophrenia meant that he was confined to Craig Dunain psychiatric hospital where he spent the rest of his life. Although verbally uncommunicative, MacPhee wove many sculptures from long grass, including hats, boots and other clothes, which he left around the grounds. Many were destroyed, but a few survive and have been exhibited (Marshal, 2011). The weavings demonstrate a beauty and power that bely their fragility, as shown in photographic evidence in the journal article by Robert Howard (Howard, 2002).
 
MacPhee sometimes wore his weavings (Marshal, 2011), perhaps as protection from the elements. A feeling of shelter and protection is also evident in my sample. The vines give a structural feeling to the piece, almost like a bushcraft shelter.
 
When I decided to sketch the sample, I chose graphite and Inktense pencils to help me recreate the texture and colours.
 
 
I particularly like the rough, gnarled vine stem contrasted with the thin, delicate wiry tendrils. 
 
 
SAMPLE 5: Even and uneven wrapping, thick piping cord
 
I chose this thick cord to give a very different feel and texture from the thinner threads I had used. The individual strands of the cord appear prominent and rope-like. 
 
 
There is a feeling of security and solidity about this wrapping. It is still possible to easily see that the object underneath is a spoon, but it also feels as if it has been ‘parcelled up’ ready to put in the post.
 
To sketch this sample I chose Neocolor water-soluble wax crayons. It is only possible to draw thick lines with this medium, so although I enjoy using the, they had not suitable for my earlier sketches.
 
 
I like the texture of the wax crayon marks, and being able to apply water allows me to soften them in places where I want to emphasis shadow. By leaving some of the crayon marks dry, I was able to simulate the roughness of the cotton cord.
 
 
Samples with combinations of materials to explore combinations of colour, texture and differences in tension
 
Inadvertently, I had already explored areas of looser verses tighter tension in sample 3, which was impossible to wrap tightly. I was looking forward to extending this with combinations of different threads, using what I had learnt in my sampling so far. 
 
I also thought about opacity. The fishing line which I had used in sample 3 was semi-transparent and this added depth and interest through semi-concealment. 
 
How the wrapping is considered in relation to the object is also important. For example, does it represent:
 
  1. Protection/healing
  2. Entrapment/confinement
  3. Concealment/hiding
  4. Restraint/imprisonment
  5. Bondage/fetish
Number 5. only occurred to me when I recalled an article in The Textile Reader (Hamlyn, 2012). Referring to fabric specifically, Hamlyn notes that ‘It (fabric) restricts direct access to the naked object, but it also has the ability to suggest, enhance, and draw attention to what it covers and adorns’ (Hamlyn, 2012:16).
 
 
SAMPLE 6: Mixed thread sample, wrapped spoon
 
I wrapped the same wooden spoon as I had for samples 1-5, this time using a mixture of threads. I used a fine beige crochet cotton, salmon-coloured Coton a Broder, aubergine purple commercially produced paper string, and raffia. 
 
I started by wrapping the handle of the spoon tightly in paper string, then I joined in the salmon thread and the beige thread. I worked in layers, and after I had good coverage of the spoon, I allowed the beige and salmon threads to become looser as I wound them. I experienced some tangling on the fine threads which I allowed to add to the texture to the wrapping. I also had to cut the threads at one point because of tangling and this gave some loose ends. I particularly like the textural effect of these. 
 
I had initially intended to finish my sample before adding the raffia (see below):
 
 
I felt ok about this, but that it could be better. I love the effect that has been created on the handle, which I feel this has worked really well. However, it was not possible to wrap the paper string loosely around the bowl of the spoon in such a way that it would stay attached. This meant that I had to use the finer threads to secure it, which gave a denser and less open structure. The sample has a similar feel to sample 4 (Boston creeper vine).
 
I decided to take the plunge and add some raffia to the bowl of the spoon. I felt that as it stood the wrapping in this area was just too loose and did not fit with the handle (which I preferred). The finished sample is shown below:
 
 
I choose natural raffia to pick up on the beige cotton thread and the natural wooden colour of the spoon. It now feels as if the spoon is more ‘parceled’ or ‘packaged’ due to the raffia knot. I can’t help but think of it as looking like a voodoo doll. The bowl of the spoon feels like a head and the handle the neck and/or body.
 
I think this change helps the sample to work better. It adds and additional texture, and helps to make the sample feel like a single unified object. 
 
 
SAMPLE 7: Mixed thread sample – wrapped egg box
 
I decided that I wanted a change from spoon-wrapping. The egg box was a cheap and available found object, with an interesting shape. 
 
I started with some of my hand spun yarn which I had plied with metallic crochet thread. Before spinning, I had selected the colour combinations of fleece and made a batt. The colours had always reminded me of costume, theatre and showmanship. They were bold, vivacious, and mysterious; reminiscent perhaps of the glitz of the circus?
 
I chose an aran weight mohair in a greenish blue colour which picked up on one of the hues in my handspun yarn. Because layering had worked so well in sample 6, I decided to take the same approach. I wrapped the egg box in the blue mohair first, getting as much coverage as I possibly could. I then started wrapping in the handspun yarn, leaving some of the mohair to show through. As I did so, I added some cut pieces of feather boa. I had chosen these for fun and because of the association costume. I wrapped both yarns tightly around the egg box so as to emphasise it’s contours. Finally, I chose some bright pink ribbon and tied it around the box to add an accent. I also sewed loops of fine shocking pink mohair into one corner and cut them to make loose ends. I particularly like this part of the sample (see photo below, bottom left corner).
 
 
I love the way that the textures and colours combine. I am so pleased with it! It is cheeky and fun, vivacious and playful. The fur and mohair impart animal characteristics (rabbit tail, the ear tufts of a toy-sized dog?). It reminds me of a battery-operated a soft toy. I can imagine it just about to squeak and jump up into the air! The pink ribbon adds a feeling of restraint (an animal harness, or lead?), yet I get the feeling of it being a naughty pet which will run away as soon as the owner turns their back.
 
Update 26/11/16: I decided to put this sample up for critique on “discuss.OCA-student.com” (it can be viewed here). I felt somewhat uncomfortable in doing so, which was strange given that I regularly post my work on my public Facebook profile and in closed OCA Textiles and OCA Sketchbooks pages. I was concerned how I might feel about feedback I didn’t agree with or conflicting suggestions. 
 
Despite my initial reservations, I am very gad that I took part in the OCA discussion/critique forum because have received some very insightful suggestions and observations. For example: that I might try and and include surprises in the surface of my wrapping (suggestive of the secret or the unexpected). Another suggestion was that the sample looked like it was in the process of being overgrown or colonised by underwater organisms such as anemones and coral. I was given a useful link to the artist Jason deCaires Taylor (Taylor, n.d.).
 
Many people saw a joyous side to the sample, interpreting it as “a bundle of good things” (i.e. childhood “treasures”). There was the suggestion of it being alive or having animals wrapped within it because of the fluffy areas. An alternative view was that it could be seen as shamanic or linked to ritual. This was interesting because I had shown sample 6 to a group of textile art friends last week and several had made a shamanic or sinister connection to this piece as well. I wondered whether it was something in my subconscious, (my creative voice maybe) that was causing this juxtapositioning these opposites?
 
 
 
SAMPLE 8: Mixed thread sample – wrapped baked bean can
 
I started with the idea that I would wrap the tin in burlap, and then add layers of other threads on top. I cut the burlap into a single long length of about 1″ in width. I used the same method as when dividing fleece arts batts ready for spinning. The diagram below explains (with the dotted line depicting the cut lines).
 
 
I wrapped along the length of the can, and the corners which I had made in the process of cutting the rectangle into a single long strip seemed to fall at the open end, making an interesting texture. I am including a photograph of the sample at this stage (see below) because I really like the result and wondered whether to stop wrapping! The weave of the burlap, the loose frayed threads and the way the layers overlap and stick out from the cylinder. All very visually attractive.
 
 
I decided that I would continue to add more threads and see what happened. I tried wrapping some orange fruit net strips around the circumference of the can, but it spoilt the texture of the burlap strips (see below):
 
 
I took this off an decided that I would wrap in the same direction as the burlap. 
 
I am interested in identity and wanted to give the suggestion of the brand identity of Heinz baked bean can through the use of colour. I found some kingfisher blue embroidery thread to use in conjunction with the orange fruit net. I decided that the orange colour in the wrapping photographed above was too dominant, so I cut small pieces and trapped them in the blue embroidery thread as I wrapped (see below)
 
 
I separated the strands of embroidery thread to get different thicknesses, and as I did so, the thread tangled. I really like this effect which adds texture to the piece. I was pleased with the overall sample, although I would ideally have liked to use wider turquoise thread (perhaps fabric strip or ribbon if I’d had the correct colour). Being sensitive to the colour and texture balance, and I feel that there is a slight room for improvement.
 
 
References:
 
Hamlyn, A. (2012) ‘Freud, fabric, fetish’. In: Hemmings, J. (Ed) The Textile Reader. London. Berg. pp.14-26.
 
Howard, R. (2002) ‘Psychology in pictures’. In: The British Journal of Psychiatry. At: http://bjp.rcpsych.org/content/181/6/0.1 (Accessed 20 November 2016)
 
Marshal, K. (2011) Creativity in care: Exhibitions: Weaver of grass, Angus. At: http://creativityincare.org/weaver-of-grass/ (Accessed 20 November 2016)
 
Taylor, J. (n.d.) Jason deCaires Taylor. At: http://www.underwatersculpture.com/ (Accessed 28 November 2016)